Product Name: phenolic glass fiber molding compound

Size:

Product Description:

Phenolic glass fiber wire molding compound

 

, Properties and uses:

This material is based on the modified phenolic resin impregnated E-glass drying, suitable for hot press molding product raw materials. Its products have high mechanical strength, good insulation properties, corrosion resistance, mildew proof, lightweight components for suppression of mechanical components requiring high strength, the complex shape of the electrical components, radio parts, higher strength mechanical parts and electrical parts and commutator (commutator), and its products also have good electrical properties, especially suitable for the Humid Tropics.

Second, the suppression of requirements:

Suppress temperature: 150 ± 5 ° C

Compacting pressure: 350 ± 50Kg/cm2.

Pressing time: 1 to 1.5min/mm

Third, the storage conditions

This material is extremely hygroscopic moisture, heat perishable. Should be stored in a cool dry place when not in use Bijin bags. Found damp, baking oven at 90 ± 5 ° C for 2 to 4 minutes before use.

This material should be used within three months from date of manufacture, such as more than three months storage time should be performance appraisal and then.

3 against the weight of this material.

The main technical indicators of the 4330-2 phenolic glass fiber molding compound

Inspection basis: JB/T5822-91, inspection program: GB/2828-87